Ring Holder No. 1
This handmade ring holder pendant is both mechanical and kinetic. It is made from pure sterling silver. It hinges open at the bottom so that the ring can be inserted and removed. Two powerful rare earth magnets hold the lid closed and keep the ring secure. A stainless steel ball bearing rolls easily around its middle. Finally, both the pendant and the chain have been finished with a subtle patina to visually enhance their form. The pendant hangs on a 24 inch long, 2mm thick silver rolo chain which closes with a sterling silver lobster clasp.
This pendant is a variation of a piece I once created for an ER surgeon whose type of work demanded he remove his wedding band at a moment's notice. He often tied it to his scrubs, but after nearly losing it more than once to the hospital laundry, he wanted a more secure place to keep it. This pendant was a solution to that problem. Since that first pendant, I have been contacted by artists and crafters who work with their hands, women whose fingers have swollen during pregnancy, and individuals looking for a way to wear an heirloom ring or the wedding band of a lost loved one.
The pendant as shown was created to hold a size 10 or 11 ring in a 1/4" width (6mm) ring. It measures approximately 26.5 mm (1.06 in.) in diameter and 7.5 mm (.3 in) thick. Each ring holder is unique and fitted to your specific ring. For that reason, the measurements and details of your pendant may vary slightly. Your pendant can be personalized to include patterned metal, a stone, or some other adornment. Another chain type and length can also be substituted. Please feel free to contact me if you have any questions or concerns about this piece before ordering, would like a particular customization, or if you would like more information on the process I use to create this piece.
If you would like to see a short video of this pendant in action, you can head over to this Instagram post:
https://www.instagram.com/p/BWL6uy1lLxc/?taken-by=down_to_the_wire_designs&hl=en
This pendant will be shipped domestically via USPS Express Mail within 6-8 weeks of purchase. International orders will be shipped via FedEx.
IMPORTANT:
This pendant contains two rare-earth magnets. If you have a pacemaker, similar implant, or any medical device that may be affected by magnets, please check with your doctor that this pendant will not interfere with its function.
HOW THIS WORKS:
If you have purchased (or are purchasing) a ring from me for this pendant: Great! Just let me know what you purchased in the Notes field during checkout and I’ll do the rest.
If this is a custom pendant created to fit a ring you already own: It’s important to me that we get a perfect fit, so I’ve developed a couple of great tricks for getting the measurements exactly right. First, start by providing the size and width of your ring in the two dropdown menus that pop up after you click the Add To Cart button. At checkout, leave me a Note on the inside and outside diameters of your ring in millimeters (check the final photo of this listing for measuring tips). After you’ve placed your order, I will send you two brass sample rings to confirm your measurements; you should be able to fit your ring between the two brass rings. If the fit is good, confirm and send them back in the included postage-paid envelope. If the fit is too far off, I might send you a revised set of samples. I will keep in touch throughout the process and I’m always available if you have any questions.
QUESTIONS:
Buying jewelry to last a lifetime can be a difficult choice. I encourage you to take a look at my excellent feedback and feel free to contact me if you have any questions before making your purchase.
(Please note: This listing is for the PENDANT ONLY. The ring is not included and is shown in the photos for reference only. You are responsible for providing me with accurate measurements. I will make your ring holder to accommodate the dimensions that you give me; if these dimensions are incorrect, the ring may not fit on the pendant. Please note these dimensions in the Notes To Seller field at checkout. After you have placed your order, I will contact you to confirm these measurements. If your ring has a stone please contact me before purchase for special instructions.
Alternatively, if you order your ring from me, I will make your holder to match that ring and will ship both together.
This handmade ring holder pendant is both mechanical and kinetic. It is made from pure sterling silver. It hinges open at the bottom so that the ring can be inserted and removed. Two powerful rare earth magnets hold the lid closed and keep the ring secure. A stainless steel ball bearing rolls easily around its middle. Finally, both the pendant and the chain have been finished with a subtle patina to visually enhance their form. The pendant hangs on a 24 inch long, 2mm thick silver rolo chain which closes with a sterling silver lobster clasp.
This pendant is a variation of a piece I once created for an ER surgeon whose type of work demanded he remove his wedding band at a moment's notice. He often tied it to his scrubs, but after nearly losing it more than once to the hospital laundry, he wanted a more secure place to keep it. This pendant was a solution to that problem. Since that first pendant, I have been contacted by artists and crafters who work with their hands, women whose fingers have swollen during pregnancy, and individuals looking for a way to wear an heirloom ring or the wedding band of a lost loved one.
The pendant as shown was created to hold a size 10 or 11 ring in a 1/4" width (6mm) ring. It measures approximately 26.5 mm (1.06 in.) in diameter and 7.5 mm (.3 in) thick. Each ring holder is unique and fitted to your specific ring. For that reason, the measurements and details of your pendant may vary slightly. Your pendant can be personalized to include patterned metal, a stone, or some other adornment. Another chain type and length can also be substituted. Please feel free to contact me if you have any questions or concerns about this piece before ordering, would like a particular customization, or if you would like more information on the process I use to create this piece.
If you would like to see a short video of this pendant in action, you can head over to this Instagram post:
https://www.instagram.com/p/BWL6uy1lLxc/?taken-by=down_to_the_wire_designs&hl=en
This pendant will be shipped domestically via USPS Express Mail within 6-8 weeks of purchase. International orders will be shipped via FedEx.
IMPORTANT:
This pendant contains two rare-earth magnets. If you have a pacemaker, similar implant, or any medical device that may be affected by magnets, please check with your doctor that this pendant will not interfere with its function.
HOW THIS WORKS:
If you have purchased (or are purchasing) a ring from me for this pendant: Great! Just let me know what you purchased in the Notes field during checkout and I’ll do the rest.
If this is a custom pendant created to fit a ring you already own: It’s important to me that we get a perfect fit, so I’ve developed a couple of great tricks for getting the measurements exactly right. First, start by providing the size and width of your ring in the two dropdown menus that pop up after you click the Add To Cart button. At checkout, leave me a Note on the inside and outside diameters of your ring in millimeters (check the final photo of this listing for measuring tips). After you’ve placed your order, I will send you two brass sample rings to confirm your measurements; you should be able to fit your ring between the two brass rings. If the fit is good, confirm and send them back in the included postage-paid envelope. If the fit is too far off, I might send you a revised set of samples. I will keep in touch throughout the process and I’m always available if you have any questions.
QUESTIONS:
Buying jewelry to last a lifetime can be a difficult choice. I encourage you to take a look at my excellent feedback and feel free to contact me if you have any questions before making your purchase.
(Please note: This listing is for the PENDANT ONLY. The ring is not included and is shown in the photos for reference only. You are responsible for providing me with accurate measurements. I will make your ring holder to accommodate the dimensions that you give me; if these dimensions are incorrect, the ring may not fit on the pendant. Please note these dimensions in the Notes To Seller field at checkout. After you have placed your order, I will contact you to confirm these measurements. If your ring has a stone please contact me before purchase for special instructions.
Alternatively, if you order your ring from me, I will make your holder to match that ring and will ship both together.
This handmade ring holder pendant is both mechanical and kinetic. It is made from pure sterling silver. It hinges open at the bottom so that the ring can be inserted and removed. Two powerful rare earth magnets hold the lid closed and keep the ring secure. A stainless steel ball bearing rolls easily around its middle. Finally, both the pendant and the chain have been finished with a subtle patina to visually enhance their form. The pendant hangs on a 24 inch long, 2mm thick silver rolo chain which closes with a sterling silver lobster clasp.
This pendant is a variation of a piece I once created for an ER surgeon whose type of work demanded he remove his wedding band at a moment's notice. He often tied it to his scrubs, but after nearly losing it more than once to the hospital laundry, he wanted a more secure place to keep it. This pendant was a solution to that problem. Since that first pendant, I have been contacted by artists and crafters who work with their hands, women whose fingers have swollen during pregnancy, and individuals looking for a way to wear an heirloom ring or the wedding band of a lost loved one.
The pendant as shown was created to hold a size 10 or 11 ring in a 1/4" width (6mm) ring. It measures approximately 26.5 mm (1.06 in.) in diameter and 7.5 mm (.3 in) thick. Each ring holder is unique and fitted to your specific ring. For that reason, the measurements and details of your pendant may vary slightly. Your pendant can be personalized to include patterned metal, a stone, or some other adornment. Another chain type and length can also be substituted. Please feel free to contact me if you have any questions or concerns about this piece before ordering, would like a particular customization, or if you would like more information on the process I use to create this piece.
If you would like to see a short video of this pendant in action, you can head over to this Instagram post:
https://www.instagram.com/p/BWL6uy1lLxc/?taken-by=down_to_the_wire_designs&hl=en
This pendant will be shipped domestically via USPS Express Mail within 6-8 weeks of purchase. International orders will be shipped via FedEx.
IMPORTANT:
This pendant contains two rare-earth magnets. If you have a pacemaker, similar implant, or any medical device that may be affected by magnets, please check with your doctor that this pendant will not interfere with its function.
HOW THIS WORKS:
If you have purchased (or are purchasing) a ring from me for this pendant: Great! Just let me know what you purchased in the Notes field during checkout and I’ll do the rest.
If this is a custom pendant created to fit a ring you already own: It’s important to me that we get a perfect fit, so I’ve developed a couple of great tricks for getting the measurements exactly right. First, start by providing the size and width of your ring in the two dropdown menus that pop up after you click the Add To Cart button. At checkout, leave me a Note on the inside and outside diameters of your ring in millimeters (check the final photo of this listing for measuring tips). After you’ve placed your order, I will send you two brass sample rings to confirm your measurements; you should be able to fit your ring between the two brass rings. If the fit is good, confirm and send them back in the included postage-paid envelope. If the fit is too far off, I might send you a revised set of samples. I will keep in touch throughout the process and I’m always available if you have any questions.
QUESTIONS:
Buying jewelry to last a lifetime can be a difficult choice. I encourage you to take a look at my excellent feedback and feel free to contact me if you have any questions before making your purchase.
(Please note: This listing is for the PENDANT ONLY. The ring is not included and is shown in the photos for reference only. You are responsible for providing me with accurate measurements. I will make your ring holder to accommodate the dimensions that you give me; if these dimensions are incorrect, the ring may not fit on the pendant. Please note these dimensions in the Notes To Seller field at checkout. After you have placed your order, I will contact you to confirm these measurements. If your ring has a stone please contact me before purchase for special instructions.
Alternatively, if you order your ring from me, I will make your holder to match that ring and will ship both together.
